By BrakeBuTT Technologies, Perth Western Australia
Lewis and Jay Thomson
BrakeBuTT (brake button) connects easily and is controlled directly from your front brake lever.
Electronically assisted, requiring less pressure to the front brake lever
No hydraulics, no extra levers!
Optional and fully adjustable.
Based in fabulous Perth, Western Australia, we at BrakeBuTT Technologies are keen, dedicated riders well aware that using both front and rear brakes together is extremely important and essential when riding motorcycles.
When riding off-road using the foot rear brake and hand front brake together is difficult and not always possible.
When slowing or stopping on-road using both brakes together can also be awkward and if not done right, may result in a fall.
Emergency braking especially if not done correctly, can be seriously dangerous.
Reality is that we don’t use both brakes most of the time.
Patent filed braking system.
BrakeBuTT automatically and progressively applies the rear brake when the front brake is applied, eliminating any error in judgement and removing the need to constantly move the boot to the rear brake foot pedal, ultimately allowing the rider to maintain body position.
Off-road use, BrakeBuTT provides maximum front and rear brake traction.
Adjustable to lock the rear wheel or not.
Keeping the bike levelled and stopping this Triumph Rocket 3 ( 500kgs with rider)
With over 50 years combined riding experience, BrakeBuTT Technologies has designed an accessory that could improve riding ability and significantly increase braking performance.
We designed a system that is extremely efficient, compact and provides benefits to all riders and also easily fitted.
Over 3 years of research, development and testing, from Perth, Australia to Erzberg, Austria to Glen Helen CA, USA, we have covered a lot of ground and BrakeBuTT system is now in production.
BrakeBuTT is suitable for all riders from beginners to the most experienced.
Our system will assist and enhance every rider’s capabilities.
Experience the confidence of accurate, controlled front/rear braking.
BrakeBuTT levels and stabilizes the bike under braking and reduces the risk of front wheel wash-out and rear wheel slide-out.
Road, adventurer, enduro, MX, quad, scooter and minibikes.
Our system attaches in minutes and is completely non-hydraulic, leaving all standard brake controls intact and fully operational.
No extra levers and absolutely no hydraulic fluid connection or bleeding!
BrakeBuTT made this possible with our specially designed, developed and engineered PCU- Pressure Control Unit providing 45kg/ 99lbs torque @12v and produces in excess of 1000psi/ 69bar hydraulic pressure cable driven via the rear foot pedal and is only the size of a GoPro but only lighter @ 100g/ 0.22lbs.
Making this possible together with our extremely powerful PCU is our custom pressure control sensor which empowers our system to operate flawlessly, also allowing front/rear braking bias to be fully adjustable.
Our quality durable components are designed and rigorously tested to handle all conditions in any riding environment. Rated IP67- Ingress Protection code, IEC standard 60529- water and dust-proof.
BrakeBuTT has the capacity to produce full brake in less than 1/2 a second, if required and is compatible with most brakes, with or without ABS.
We at BrakeBuTT Technologies have been extremely excited to be riding and developing this new system and now it is time for us to share with you, we strive to increase the enjoyment, the passion and the performance when we take to the track, the trail or the open road.
Subject to a comprehensive international intellectual property portfolio.